ATIG210PAC

ATIG210PAC

Features

Outstanding technology: portable and digital, highly efficient inverter
Applicable for heat-sensitive materials: perfect welding quality of heat-sensitive material and aluminum
Fully controlled AC waveform: AC balance, AC frequency, and others
Fully controlled pulse wave: pulse duty cycle, base current, and high-speed pulse frequency
Multiple controllable parameters: pre-gas, post-gas, up-slope, down-slope, initial current, and final current
HF/Lift TIG: outstanding arc starting performance
Multiple trigger mode: 2T for short welds and 4T for long welds
Fast dynamic response: good arc characteristics
PFC module: to reduce harmonic wave input and improve efficiency of power source, which meets needs of 16A input (PFC model ONLY)
Save and recall: up to 10 sets of parameters

Specification

		ATIG210PAC
Rated input voltage /frequency (V/Hz)		1 phase, AC230V±10%, 50 /60Hz
Rated input capacity (KVA)		5.7
Rated input current (A)		25
Duty cycle (40℃)		30%@210A
OCV (V)		60
MMA	Output current range (A)	10-170
	Arc force (A)	0-100
	Hot start (A)	0-100
TIG	Output current (A)	3-210
	Pre-gas /post-gas (s)	0.1-9.99 /0.1-60
	Initial /final current (A)	3-210 /3-210
	Up-slope /down-slope time (s)	0-10 /0-15
	Peak current (A)	3-210
	Base current (A)	3-210
	Pulse frequency (Hz)	DC: 0.2-500/ AC: 0.2-20
	Pulse duty cycle	5-95%
	AC frequency (Hz)	10-250
	AC balance	-40%±40%
	Trigger mode	2 /4T, Spot, Repeat
	Arc ignition method	HF /Lift
Protection class		IP23S
Insulation class		F
Dimension (mm)		430160300
Weight (kg /lb)		11.5 /25.2